SNAPMAKER 2.0 LASER MODULE - 40W

Snapmaker Laser Modules are our latest high-power diode laser add-ons, featuring Air Assist. Users can upgrade their printers to much more powerful desktop laser cutters with this powerful module.

Features:

• Cuts 20 mm pine in one pass
• Equipped with Air Assist
• Air Assist can be controlled via Luban
• Integrated quick-swap mechanism

Snapmaker Laser Modules are our latest high-power diode laser add-ons, featuring Air Assist. Users can upgrade their printers to much more powerful desktop laser cutters with this powerful module.

General features:

• Cuts 20 mm pine in a single pass
• Cuts 15 mm basswood plywood in a single pass
• Equipped with Air Assist (Air Assist pump included)
• Air Assist can be controlled via Luban
• Integrated quick-swap mechanism
• Focus laser with focus lever
• Align work with crosshairs
• Laser safety shield
• Orientation detection
• Overheat protection

Intelligent Air Assist

Prevent charring, improve the quality of your work, and keep the laser lens clean. Air Assist can be controlled via Luban, saving you the hassle of manually turning it on or off for different layers.

Over 1000 ready-to-use templates in Luban

When performing both engraving and cutting in one job, it is not recommended to apply Air Assist to all layers. Therefore, Luban can allow you to enable Air Assist only on the cutting layers, saving you the hassle of manually turning it on or off for different layers. It provides an extensive library of current templates, including common patterns, shapes, and icons, to enable you to create a design in minutes.

Easy to focus

Calibrate the focus by entering the material thickness on the touchscreen and perform automatic focusing or laser focusing with the focus lever.

Laser safety shield

Reduce laser radiation. Together with the use of the Enclosure for 2.0, Artisan, or Ray, laser hazards can be reduced from Class 4 to Class 1.

Compatibility:

• Snapmaker 2.0 Quick-Swap Kit
• Snapmaker 2.0 A350T/A350, A250T/A250, F350/F250
• Snapmaker 2.0 A150 (compatible with 20W only)