100 Ampere Charge Controller

-Advanced Maximum Power Point Tracking (MPPT/PWM) technology, efficiency is not less than 99.5%. High-quality components improve system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee of tracking efficiency.

-Large-screen LCD display, charge and discharge current display, aggregated power generation and discharge power query, temperature display, light control delay control; with power-off memory and other functions.

-Dual USB output, maximum current is 2.5A. Equipped with all necessary protection devices, system control parameters are adjustable, easy to install and use. Integrated overheating, overcurrent, short circuit, open circuit protection, fault elimination, automatic controller recovery. Two-way MOS tube anti-backflow circuit, high power charging mode, ultra-heat.

-Built-in short-circuit protection, open-circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with automatic recovery function, does not damage the controller.

-Real-time display of temperature, charging current and discharging current. Autofocus MPPT tracking charging current, high charging efficiency, charging process does not stop detection, two-way focus tracking.

Specifications:

Name: Solar Controller with LCD Screen

Voltage: DC 12V / 24V

Display: LCD Screen

Self-consumption: <10MA

Overcharge protection: 14.4V / 28.8V

Over-discharge float charge: 13.7V / 27.4V

Charge recovery voltage: 12.6V / 25.2V

Overload protection: 10.7V / 21.4V

Over-discharge recovery: 12.6V / 25.2V

Dual USB output: 5V / 2A (charges mobile phone, iPad, etc.)

Working temperature: -35 ℃ -60 ℃

12V suitable for 18V solar panel, 24V suitable for 36V solar panel

Corresponding 12.0 volt lead-acid battery

The floating voltage is set to: 13.6

The recovery discharge voltage is set to: 12.6

The discharge cut-off voltage is set to: 10.7

Corresponding 12.8 volt lithium iron phosphate battery

The floating voltage is set to: 14.6

The recovery discharge voltage is set to: 13.6

The discharge cut-off voltage is set to: 11.0

Corresponding 11.1 volt lithium battery

The floating voltage is set to: 12.6

The recovery discharge voltage is set to: 11.6

The discharge cut-off voltage is set to: 9.6

The minute is adjustable when the output is off, which is more convenient (there is no adjustment when the market is only available).

Description of the photovoltaic system power supply:

1X Solar Panel Battery Charge Controller

1X User Manual

Notes:

1. The charge controller is suitable for lead-acid batteries: OPEN, AGM, GEL, nickel hydride, lithium, li-ion or other batteries.

2. This controller can only use photovoltaic panels as a charging power source. Do not use DC or other power sources as a charging power source.

3. The LCD display has an error of 0.2V-0.3V, but this is normal.

4. Old batteries may have degraded capacity after many cycles, easily dropping below 8V, resulting in the controller shutting down (the LCD screen becomes totally "dead").