PRIMASELCT PEI ULTEM 9085 - 1.75 MM - 500 G - NATURAL

PrimaSELECT™ Ultem 9085 Polyether Imide (PEI) is a high-performance amorphous thermoplastic material with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardant properties (UL 94-VO rated), and strength-to-weight ratio. Start additive manufacturing end-use parts right away.

PrimaSELECT™ Ultem 9085 material properties:

• Polyether Imide (PEI) 3D printer filament
• High-performance thermoplastics - Polyether Imide (PEI)
• Excellent strength-to-weight ratio
• Superior mechanical performance
• Flame retardant (UL 94-VO rated)
• Glass transition temperature (Tg) of 186 °C

PrimaSELECT Ultem 9085 filament offers high impact resistance, strength & durability

PrimaSELECT PEI filament has unique properties because it does not come into contact with water during the manufacturing process and is directly packaged in a vacuum package. These properties make PrimaCreator PEI filament especially suitable for use in FDM and FFF 3D printers. The Ultem material for 3D printing has excellent layer adhesion which results in a great improvement in impact resistance, strength, and durability. It offers high performance throughout the entire 3D printing process.

Successfully 3D print Ultem PEI filament

To make a successful PEI 3D print there are some things to keep in mind. Your 3D printer needs to have the performance needed to meet the demands of PEI filaments. The material should be 3D printed with a nozzle temperature of 355-390°C. The heated bed should be set at 120-160°C and it is important to have a heated chamber. Also make sure your 3D printer is placed in a room where there are hardly any drafts and temperature fluctuations.

PEI with good print platform adhesion

PEI is best printed on a PEI sheet at a print speed of 15-30mm/s.