PRIMACREATOR VALUE JEWELRY CASTING PRO - 1 KG

PrimaCreator Value Jewelry Casting Pro resin is an affordable and high-quality casting resin that is very easy to use due to its high wax content. This means there is no need for expensive plaster materials and shrinkage of the casting equipment, and it has the ability to reproduce super fine details.

Features:

• Optimized for UV light source 395 – 405 nm
• Fast curing time, 6-8 seconds per layer (depending on color) for faster prints. (Monochromatic LCD)
• After 3D printing is complete, clean the print with IPA (isopropyl alcohol) or PrimaCreator Resin Cleaner to rinse away any remaining excess resin
• PrimaValue resins work on different 3D printers
• When it's time for curing, you can use sunlight or a UV curing chamber.

PrimaCreator Value Jewellery Casting Pro - 1 kg

PrimaCreator Value Jewelry Casting Pro resin is an affordable and high-quality casting resin that is very easy to use due to its high wax content. This means there is no need for expensive plaster materials and shrinkage of the casting equipment, and its ability to reproduce super fine details.

Not only is it capable of reproducing super fine details, but it can also reproduce very thick parts, without the risk of cracking during curing and drying. It is also compatible with DLP and LCD resins. Tests have shown that DLP printers tend to work better due to the high wax content, but we have found excellent results from both sides.

Some examples/use cases include batch printing of rings, earrings, and test tubes. Costume jewelry, wedding rings.

The resin is suitable for use on LCD, mono LCD, and DLP 3D printers that use a 395-405 nm light source. Many popular printers include the Photon Mono series, the new Photon M3 series, and Creality 3D's Halot series. Compatibility doesn't stop there, the resin is also designed to be used with many other machines, including but not limited to: Phrozen, Zortrax, Wanhao, SparkMarker, Nova3D, and more!

3D Print Settings:

• Optimized for UV light source 395 – 405 nm
• Fast curing time, 6-8 seconds per layer (depending on color) for faster prints. (Monochromatic LCD)
• After 3D printing is complete, clean the print with IPA (isopropyl alcohol) or PrimaCreator Resin Cleaner to rinse away any remaining excess resin
• PrimaValue resins work on different 3D printers
• When it's time for curing, you can use sunlight or a UV curing chamber.

Depending on the 3D print, curing times may vary:

• In a curing chamber with UV light, it will take approximately 2-5 minutes
• In sunlight, 10-20 minutes
• In daylight on a cloudy day, it can take up to 60 minutes
• When you want amazing results at a lower cost than many other brands, PrimaCreator VALUE resin should be your first choice!