POLYMAKER NYLON COPA 6/6-6 750g

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance up to 180°C.

Features:

• High heat resistance
• Tough material
• High tensile strength

Polyamide

PolyMide™ is a family of nylon/polyamide-based filaments. Manufactured with Polymaker’s Warp-Free™ technology, PolyMide™ filaments offer nylon’s inherent engineering properties and ease of printing.

CoPA

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance up to 180°C.

Recommended Settings

• Nozzle Temperature: 250˚C – 270˚C
• Printing Speed: 30 mm/s – 60 mm/s
• Bed Temperature: 25˚C – 50˚C
• Bed Surface: Glass with glue
• Cooling Fan: Off

Note: It is highly recommended to use PolyBox™ during printing with PolyMide™ CoPA and to store it in its resealable bag. To ensure good heat resistance of the printed part, it is recommended to anneal the 3D printed PolyMide™ CoPA model. Annealing settings: 80˚C for 6 hours

If used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, it is recommended to switch to a wear-resistant nozzle such as a hardened steel nozzle.