Marvel Spiderman Miles Morales 3D Deco Light LED Wall Lamp + Sticker
Marvel Spiderman Miles Morales 3D Deco Light LED Wall Lamp + Sticker
Regular price
€36,89 EUR
Regular price
€41,91 EUR
Sale price
€36,89 EUR
Taxes included.
Shipping calculated at checkout.
SPIDERMAN MILES MORALES
Lamp with 3D decorative crack sticker
Dimensions: 16.21 x 9.5 x 25.5 cm; 453.59 grams
Uses 3 AA batteries sold separately
Safe - Cordless, battery operated
Cool - Never gets hot to the touch
Green - Uses LED bulbs
Easy - Simple to install
Awesome - Looks great both on and off
Fun - 3D crack sticker included
Convenient - ON/OFF switch
HOW TO INSTALL YOUR 3D CRACK STICKER
Unroll the sticker and flatten out any creases.
Place the sticker where desired, apply some masking tape (painter's tape or similar) to the top edge of the sticker and mark arrows on the tape and sticker as a reference for placement.
Carefully peel off the backing of the sticker.
Align the arrows and carefully attach the top (first 1-2 inches) of the sticker to the wall, making sure to keep the bottom away from the wall.
Using a credit card or flat, dull surface, slowly adhere the sticker, pressing against the paper backing and working out any air bubbles; remember to keep the bottom of the sticker lifted from the wall as you work your way down, outwards, and to the edges until finished.
Very slowly peel the paper from the wall, ensuring the (thin) edges are attached to the wall. If any of the decals lift off with the paper, simply lay it back against the wall and press firmly with your credit card until the decal adheres to the wall.
Drill a hole in the marked X spaces and insert the supplied wall plug. Insert the supplied screws about ¾ of the way and place the light onto the screws.
Enjoy!
HOW TO REMOVE THE 3D CRACK STICKER WITHOUT DAMAGING THE WALL
Warning! – Sticker removal should only be done by an adult.
Please remove the screws from the wall before removing the crack sticker.
Using a standard hairdryer, set the temperature to maximum.
Heat should be evenly distributed over the sticker, holding the hairdryer 1-2 inches away from the wall.
Before attempting to remove the sticker, ensure that you have heated the entire surface.
Once the entire sticker is heated, begin to peel it from the wall starting from the top, slowly pulling downwards.
Position the dryer over the sticker as you peel it to make it easier for the sticker to detach.
For best results, do not rush this process. Take your time and remove the sticker slowly.
Use warm, soapy water to remove any adhesive residue.
NOTE: This process will vary depending on the climate of your area and how long the sticker has been on the wall.
