Marvel Wall Lamp Decoration Baby Groot 3D Deco Light LED Sconce + Sticker
Marvel Wall Lamp Decoration Baby Groot 3D Deco Light LED Sconce + Sticker
BABY GROOT
3D Deco Lamp with Crack Sticker
Dimensions: 16.21 x 9.5 x 25.5 cm; 453.59 Grams
Uses 3 AA Batteries Sold Separately
Safe - Cordless, battery operated
Cool - Never gets hot to the touch
Green - Uses LED bulbs
Easy - Simple to install
Awesome - Looks great on or off
Fun - 3D crack sticker included
Convenient - ON/OFF Switch
HOW TO INSTALL YOUR 3D CRACK STICKER
Open the sticker and smooth out any creases.
Position the decal where you would like it, apply masking tape (painter's tape or similar) to the top edge of the decal and mark arrows on the tape and decal as a placement reference.
Carefully remove the backing from the decal.
Align your arrows and carefully attach the top (first 1-2 inches) of the decal to the wall, making sure to keep the bottom away from the wall.
Using a credit card or flat, dull surface to slowly adhere the decal, pressing against the paper backing and removing any air bubbles; remember to keep the bottom of the decal lifted from the wall as you work your way down, out and to the edges until finished.
Very slowly peel the paper from the wall, making sure the (thin) edges are sticking to the wall. If any of the decals come off with the paper, simply place it back against the wall and press firmly with the credit card until the decal adheres to the wall.
Drill a hole at the marked X's and insert the wall plug, provided. Insert the provided screws approximately ¾ of the way and place the light on the screws.
Enjoy!
Key Features:
Soft Lighting
Energy efficient LED bulbs are used to light this Groot lamp. The night light is cordless so it can be placed anywhere - No electrical outlet required. The 3D Marvel light provides enough light to see the child without having to turn on additional lighting.
Looks great ON and OFF
3D Marvel Lights looks great whether the light is on or off. The light is easy to use thanks to its on/off switch. Once activated, the light stays on for 1 hour.
3D Crack Wall Sticker
Crack wall stickers are included with every 3D decorative light. Used as a mounting template, the sticks work together with the product to create a night light from the
HOW TO REMOVE THE 3D CRACK STICKER WITHOUT DAMAGING THE WALL
Attention! – Sticker removal must only be performed by an adult.
Please remove the screws from the wall before removing the crack sticker.
Using a standard hair dryer, set the temperature to maximum.
The heat should be distributed evenly over the sticker, holding the hair dryer 1-2 inches away from the wall.
Before attempting to remove the sticker, make sure you have heated the entire surface.
Once the entire sticker has been heated, start peeling it from the wall starting from the top, slowly pulling it downwards.
Place the dryer over the sticker as you peel it off to help the sticker detach.
For best results, do not rush this process. Take your time and remove the sticker slowly.
Use warm soapy water to remove any adhesive residue.
NOTE: this process will vary depending on the climate of your area and how long the sticker has been on the wall.
