Marvel Spider-Man 3D Deco Light LED Wall Lamp + Sticker
Marvel Spider-Man 3D Deco Light LED Wall Lamp + Sticker
Regular price
€29,90 EUR
Regular price
€38,90 EUR
Sale price
€29,90 EUR
Taxes included.
Shipping calculated at checkout.
SPIDERMAN
Lamp with 3D decorative crack sticker
Dimensions: 16.21 x 9.5 x 25.5 cm; 453.59 grams
Uses 3 AA batteries (sold separately)
Safe - Cordless, battery operated
Cool - Never gets hot to the touch
Green - Uses LED bulbs
Easy - Simple to install
Awesome - Looks great on or off
Fun - 3D crack sticker included
Convenient - ON/OFF switch
HOW TO INSTALL YOUR 3D CRACK STICKER
Unroll the sticker and smooth out any creases.
Position the sticker where desired, apply masking tape (painter's tape or similar) along the top edge of the sticker and mark arrows on the tape and sticker as a reference for placement.
Carefully peel off the backing of the sticker.
Align the arrows and carefully attach the top (first 1-2 inches) of the sticker to the wall, making sure to keep the bottom portion away from the wall.
Use a credit card or flat, dull surface to slowly adhere the sticker, pressing against the paper backing and removing any air bubbles; remember to keep the bottom of the sticker lifted off the wall as you work your way down, out, and to the edges until complete.
Very slowly peel the paper backing away from the wall, ensuring the (thin) edges adhere to the wall. If any of the stickers lift with the paper backing, simply place it back against the wall and firmly press with the credit card until the sticker adheres to the wall.
Drill a hole at the marked X's and insert the wall anchor provided. Insert the provided screws approximately ¾ of the way in and hang the light on the screws.
Enjoy!
HOW TO REMOVE THE 3D CRACK STICKER WITHOUT DAMAGING YOUR WALL
Warning! – Sticker removal should only be performed by an adult.
Please remove the screws from the wall before removing the crack sticker.
Using a standard hairdryer, set the temperature to high.
Heat should be evenly distributed over the sticker, holding the hairdryer 1-2 inches away from the wall.
Before attempting to remove the sticker, ensure the entire surface has been heated.
Once the entire sticker has been heated, begin to peel it from the wall starting at the top, slowly pulling downwards.
Place the dryer over the sticker as you peel to make it easier for the sticker to release.
For best results, do not rush this process. Take your time and slowly remove the sticker.
Use warm soapy water to remove any adhesive residue.
NOTE: This process will vary depending on the climate of your area and how long the sticker has been on the wall.
