MAGIGOO PRO METAL - THE 3D PRINTING ADHESIVE

Are you experiencing warping issues during 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of the non-sticky first layer (warping). This is the most common problem in 3D printing for production with FFF/FDM technology.

Magigoo adhesive product features:

• The adhesive pen makes your 3D prints stick easily to the surface
• Minimizes warping
• Saves time, filament, and nerves

WHY: 

BASF Ultrafuse 316L enables the production of solid 316L grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly refined metal particles embedded in thermoplastic binders. Therefore, as a filament, the metal-polymer composite presents none of the occupational and safety risks associated with handling fine metal powders. This allows for cost-effective, simple, and safe 3D printing of stainless steel parts.

Due to the thermoplastic nature of the filament binder materials and differential thermal cooling during FDM printing, BASF Ultrafuse® 316L printed parts are prone to warping. Furthermore, due to the delicate nature of the green part, care must be taken when removing BASF Ultrafuse® 316L printed parts to avoid part deformation. Magigoo Metal provides secure and reliable adhesion during printing and allows for easy removal of the printed part through water immersion, thus avoiding potential damage to the green part.

HOW: 

For using Magigoo Metal with BASF Ultrafuse® 316L, a build plate temperature of 95-105 °C is recommended; however, printing conditions may vary between printers. 

• Shake the bottle.
• Apply to the desired area by pressing the nib onto the bed (activating the internal valve) and spreading as needed.
• Print according to filament/printer manufacturer recommendations
• After printing. Immerse the entire build plate in water or immerse the part around it with water. After a short period, typically 30 minutes to 2 hours, depending on the part size, the part should detach itself or be easy to remove with a slight twist.
• Clean any residue: use a damp cloth to wipe. 

SAFETY:

Using this product with filaments other than BASF Ultrafuse 316L may cause excessive adhesion and damage the build surface. Follow the instructions in the technical data sheet for best results.