Loctite 3D Cleaner C - 1kg

LOCTITE 3D Cleaner C is used for cleaning parts printed with Digital Light Processing (DLP). It is non-flammable at room temperature and is not harmful. LOCTITE 3D Cleaner C can be used at elevated temperatures up to 50 °C to adjust cleaning performance.

Features:

• Cleans impossible parts
• Effectively dissolves 3D printing resins
• Rinsable with water
• Does not damage green or cured resins when used as recommended

Cleaner C

LOCTITE 3D Printing Cleaner C is a non-flammable at room temperature (flammable category 4) cleaner designed for post-processing cleaning of SLA/DLP printed parts.

Instructions for use:

• Provide adequate ventilation and use personal protective equipment
• Use at 20 °C to 50 °C
• Immerse for 2 to 4 minute intervals (typical) with adequate mixing
• Rinse with clean DI water for 1-2 minutes with agitation, optionally rinse with IPA if indicated on the material's technical data sheet
• Allow adequate drying time before UV curing (typically 60 minutes at 20 °C - 25 °C)
• Cleaning time varies depending on resin type, temperature, agitation, and part complexity
• To achieve the properties indicated in the TDS, validated workflows must be followed.