Forward AM Ultrafuse PLA PRO1

Ultrafuse PLA PRO1

Ultrafuse PLA PRO1 is BASF's high-quality tough PLA, which means: speed, strength, versatility, consistency!

Ultrafuse PLA PRO1 is developed as a high-speed engineering thermoplastic material that prints as easily as PLA, at speeds previously considered unusable. Yet it retains far better mechanical properties, even surpassing printed ABS objects. Something demanding users always had to compromise on before Ultrafuse PLA PRO1.

Features:

• Speed: Reduce print times by 30% – 80%
• Strength: Overall excels beyond printed ABS in mechanical properties
• Versatility: A filament that can be tuned to achieve incredible speeds and excellent surface finish
• Consistency: Truly consistent filament, even between colors and batches, it will always perform as expected

Optimize printing

By varying print settings, users can optimize for speed, strength, surface quality, or a mix of these qualities beyond the performance levels of traditional filaments. When you find yourself in an environment that demands reliable performance print after print, look no further than boosting your productivity with Ultrafuse® PLA PRO1. By increasing speed, you can save at least 30%* in print time. To achieve this high speed, we recommend setting your printer in the temperature range between 220°C and 230°C*. Super-fast printing can affect surface quality. Ultrafuse PLA PRO1 has strong layer adhesion which makes prints much stronger, thus increasing functionality.

TIPS AND TRICKS

Fast print settings:

• Print temperature: 220 °C ± 10 °C
• Print speed: 120-150 mm/s
• Infill density: ≥ 20%
• Bed adhesion: clean glass
• Fan speed: 100%
• Top thickness: 1.2 mm
• Layer height: 0.1 mm
• Bed temperature: 60°C or unheated bed with tape/glue

Strong settings:

• Print temperature: 220 °C ± 10 °C
• Print speed: 40 – 70 mm/s
• Infill density: ≥ 20% (higher = stronger)
• Bed adhesion: clean glass
• Fan speed: 0%
• Top thickness: 1.2 mm
• Layer height: ≤ 0.06 mm
• Bed temperature: 60 °C or unheated bed with tape/glue

Aesthetic settings:

• Print temperature: 220 °C ± 10 °C
• Print speed: ≤ 70 mm/s
• Infill density: ≥ 20%
• Bed adhesion: clean glass
• Fan speed: 100%
• Top thickness: 1.2 mm
• Layer height: ≤ 0.1
• Bed temperature: 60 °C or unheated bed with tape/glue

BASF Quality Control

The best available raw materials are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery ensures truly consistent filament, even between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable back to the source.