Forward AM Ultrafuse PET - 1.75mm - 750g

Ultrafuse PET will give you outstanding print results: good layer adhesion, high resolution and easy to handle. This high-quality filament is made of high-quality, food-approved PET (polyethylene terephthalate).

Features:

• As easy to print as PLA
• Possibility of watertight prints
• Premium food-approved raw material
• Good layer adhesion
• Easy to handle

Ultrafuse PET is made of high-quality, food-approved PET (polyethylene terephthalate). PET is widely used to produce food and beverage containers and bottles. This high-quality filament will provide outstanding print results: good layer adhesion, high resolution, and ease of handling.

Ultrafuse PET is as simple as PLA but much stronger. The filament has a wide operating window for printing (temperature versus speed), so it can be used on any 3D printer. Ultrafuse PET is 100% recyclable, waterproof, and has exceptional colors and finishes.

Tips & Tricks

• Temperature: 210 degrees
• Heated bed: 75 degrees
• Speed: between 30 and 70 mm

Material Properties

• Tensile strength (MPa): 17.2 (ZX), 33.4 (XY)
• Flexural modulus (MPa): 1826 (ZX), 1840 (XZ), 2063 (XY)
• Elongation at break: 1.1% (ZX), 2.7% (XY)
• Notched Izod impact strength (kJ/m2): 1.8 (ZX), 1.9 (XZ), 2.1 (XY)
• Unnotched Izod impact strength (kJ/m2): 4.1 (ZX), 7.7 (XZ), 12.3 (XY)
• HDT at 0.45 MPa: 63 oC