Elegoo - Mercury Plus V3.0 - 2-in-1 Wash and Cure Station

Increased dimensions for greater capacity

Upgrade to the Mercury Plus V3.0 for increased capacity and efficiency. With a 7.5L cleaning capacity (114% more than the previous version) and a 460% larger curing area, it's perfect for easily processing large models or multiple prints at once.

Dual Cleaning Option

Depending on your needs, you can choose between two convenient cleaning modes:

•  Basket Mode: Remove the model from the print bed and place it directly into the basket. Ideal for quick cleaning, this mode can accommodate models measuring up to 230mm x 135mm x 260mm.
•  Suspended Mode: Attach the print bed to the adjustable mounts and start cleaning. These brackets, capable of accommodating plates up to 10 inches, ensure a perfect fit. This mode is suitable for models with maximum dimensions of 214mm x 135mm x 180mm.

Deep cleaning

Thanks to the new generation POM bearing, the Mercury Plus V3.0 offers extremely smooth rotation and even more efficient water agitation. This ensures your models are cleaned more effectively, and residual resin is completely removed.

Powerful 360° perimeter hardening

Thanks to the 360° rotating plate and 24 x 405 nm UV lamps, this machine ensures fast and uniform curing, perfect for highlighting every detail of your models. Thanks to the light columns and reflective mirrors positioned under the transparent top, light is optimally distributed. This will give you complete hardening from top to bottom and excellent quality surfaces.

Simple operation, easy to use

The machine features a very intuitive touch panel that allows you to easily control the settings and remaining time. You can adjust the wash and cure time, up to a maximum of 30 minutes, to achieve perfect results every time.

UV Protective Cover

The machine's UV cover blocks 99.9% of ultraviolet rays, protecting your eyes while ensuring optimal curing. For added safety, the microswitch automatically stops the process if you remove the cover, ensuring comfortable and safe use.

Excellent compatibility

This machine is compatible with most LCD, DLP, and SLA 3D printers, making it an excellent choice for simplifying and optimizing post-processing of your prints.
It was designed specifically for Elegoo resin 3D printers. If you are using the Jupiter series, you will need to remove the print bed for cleaning. For other models, simply check the "MAXIMUM WASH VOLUME" section in the specifications to determine if plate removal is necessary based on print height.

Box contents

• 1x Mercury Plus V3.0
• 1x Cleaning Tray
• 1x Drying Turntable
• 1x Cleaning Basket
• 2x Adjustable brackets
• 1x User Manual
• 1x Tool Kit
• 1x Power Cable