CREALITY K2 PLUS COMBO

The K2 Plus Combo revolutionizes 3D printing with its intelligent CFS unit, enabling multi-color printing and automatic filament backup. As the pinnacle of Creality's second-generation K Series, the K2 Plus boasts a large build volume of 350 x 350 x 350 mm. It features the cutting-edge APUS extruder, a closed-loop motor system, and an active chamber heater, among other advanced features. Experience unparalleled precision and versatility with the K2 Plus Combo, setting new standards in 3D printing technology.

Key Features

• Supports multi-color printing up to 16 colors using 4 CFS units
• Direct drive extruder
• Tilt detection
• 350x350x350mm build volume
• Maximum print speed 600 mm/s

The K2 Plus Combo revolutionizes 3D printing with its intelligent CFS unit, enabling multi-color printing and automatic filament backup. As the pinnacle of Creality's second-generation K Series, the K2 Plus boasts a large build volume of 350 x 350 x 350 mm. It features the cutting-edge APUS extruder, a closed-loop motor system, and an active chamber heater, among other advanced features. Experience unparalleled precision and versatility with the K2 Plus Combo, setting new standards in 3D printing technology.

Super Strong "Matrix" Frame

The K2 Plus features a robust "Matrix" exoskeleton, crafted from aerospace-grade aluminum alloy. This die-cast frame, including reinforced XYZ axes, ensures maximum stability and precision, even during high-speed printing, making it the perfect choice for demanding projects.

Substantial 350 mm³ Print Dimensions

With a generous build volume of 350 x 350 x 350 mm, the K2 Plus can handle large-format models or multiple smaller parts simultaneously. This large capacity allows you to achieve your most ambitious 3D printing goals.

Advanced Stepper Servo Motors for all Axes

Equipped with cutting-edge step-servo motors, the K2 Plus delivers 32,768 microsteps per revolution, guaranteeing unparalleled precision and responsiveness. The printer achieves impressive speeds of up to 600 mm/s with an acceleration of 30,000 mm/s², all while maintaining quiet operation at just 45 dB during 300 mm/s printing.

Next-Gen "Apus" Extruder Kit

The all-metal Direct Drive Apus extruder is engineered for excellence. It includes an integrated filament cutter, a run-out sensor, and a tri-metal nozzle that supports a flow rate of 40 mm³/s. The extruder can reach temperatures up to 350 °C, allowing it to handle a wide range of high-performance materials without clogging, and is easy to maintain.

Super Material Master

The K2 Plus is a master of material versatility. Its actively heated chamber can reach up to 60 °C, and the steel-tipped nozzle, capable of up to 350 °C, makes it suitable for printing with wear-resistant engineering materials with high melting points. Whether you're working with PLA, PETG, ABS, ASA, or PA-CF, this printer has you covered.

Dual AI Camera

The K2 Plus features two AI-driven cameras: a toolhead camera for fine-tuning PA values and flow rates, and a chamber camera that monitors potential issues such as spaghetti failures, foreign objects, or idleness. These advanced features ensure impeccable print quality, with dimensional accuracy reaching up to 0.05 mm.

Creality Filament System (CFS)

The intelligent Creality Filament System (CFS) enhances your 3D printing experience by enabling automatic filament selection, switching, and relay, along with hermetic filament storage. With four linked CFS units, the K2 Plus can achieve 16-color printing, offering an expansive palette for your projects. The system also simplifies filament management with automatic loading and unloading and also acts as a dryer with intelligent temperature and humidity controls.

Tip: The CFS accommodates four 1kg spools with a diameter of 197-202mm and is compatible with various filaments including PLA, PETG, ABS, ASA, and PA-CF. However, it does not support flexible materials like TPU or moisture-sensitive filaments like PVA/BVOH.

Additional High-Tech Features:

• 800-watt AC high-performance heating system with overheating protection and automatic shutdown for safety reasons.
• 4.3-inch color touchscreen for intuitive operation.
• Dual auxiliary fans for optimal cooling, no ripples at any speed.

The Creality K2 Plus Combo is the ultimate tool for anyone looking to push the boundaries of what's possible in 3D printing. With its combination of speed, precision, and versatility, this printer is ready to tackle your most complex and creative projects, delivering impeccable results every time.

Construction and Technical Details
Compatible Filament Diameter	1.75 mm
Maximum Nozzle Temperature	350 °C
Open Filament System	YES
Extruder Type	Dual Gear Direct Drive
Recommended Maximum Print Speed	600 mm/s (material dependent)
Build Volume	Dimensions: 350 mm x 350 mm x 350 mm
Maximum Build Plate Temperature	120 °C
Build Plate Material	Flexible Steel Plate
Build Plate Leveling System	Automatic
Build Chamber During Process	Closed
Heated Build Chamber	Yes, maximum 60°C
Enclosed Filament Chamber	YES
Number of Extruders	1
Installation Space / Requirements
Overall Dimensions	Dimensions: 495 mm x 515 mm x 916 mm
Net Weight	38.5 kg
Voltage	AC: 100 V240 V (50-60 Hz)
Equipment
Filament Run-out Sensor	YES
Filament Clogging Sensor	YES
Touch Screen	YES
Camera	YES
Connection
USB Port	YES
Ethernet Port	YES
Wireless Network	YES
Precision
Layer Height	0.05 - 0.3 mm
Resolution	0.1 mm
Shipping
Shipping Box	Dimensions: 612 mm x 582 mm x 752 mm
Gross Weight	54 kg