ROYCE 2-CYLINDER 12V 85L PORTABLE 150psi COMPRESSOR FOR CAR VAN MOTORCYCLE TIRES

Portable high-pressure twin-cylinder compressor, powered by 12v or via the cigarette lighter socket with the appropriate plug, or via the included adapter to connect it directly to your car's battery. It can be used to inflate car, scooter, and camper tires.
Ultra-compact and lightweight, equipped with a pressure gauge.
The compressor comes with a convenient carrying case for practical and easy transport.

Technical features:
Power supply: 12-13.8 v
Max amperage: 30a max
Air flow: 85 l / m max
Pressure: 150 psi
Power supply: 12v cigarette lighter socket
Alternative power supply: direct connection to the battery.

Step 1: Pull out the air hose, make sure the nozzle lever is in the up position.
Step 2: Place the nozzle over the tire valve stem or other item to be inflated.
Step 3: Lock the nozzle onto the valve stem by pressing down on the lever.
Step 4: Turn the compressor/reflector switch to the COMPRESSOR position to turn on the compressor.
Monitor the pressure gauge carefully.
Step 5: When the desired pressure has been reached, press the compressor/reflector switch to the OFF position to turn off the compressor. Disconnect the air hose and replace it inside the unit.Car air compressor
Brand: ROYCE
Item no: RVAC-12V
Input voltage 13.8 V
Maximum flow 85 l / min
Working pressure: 150 psi.
Ambient temperature: -55-60 C

Advantage:
1. auto-protector cut off when the tire is full.
2. with LED light for night use
3. with shock absorption feet, running smoother
4. inflate quickly, fully fill a flat tire in 5-7 minutes
5. beautiful appearance, convenient for carrying

How to use?
1. Insert the air pump cable plug into the car cigarette lighter for more power
2. Turn on the car air pump
3. After starting the air pump, screw the pump connector into the tire inlet
4. During inflation, the air pressure gauge needle will rise as the pressure increases. When it reaches the appropriate pressure, turn off the car air pump. And then remove the plug and pump connector.

applications:
1. This model is suitable for all 12v car tires, especially for minibuses, trucks under 2 tons, high-quality cars. Large flow and fast inflation.

2. This model is also suitable for motorcycles, bicycles, balls, inflatable boats, beach beds, air-filled toys, and so on.
3. It is very useful in emergencies, such as when the tire loses air on the highway, when you are outdoors, or when you go to the office in the morning.
4. A car with normal tire pressure could ensure safe operation while saving gas.

Warning:
1. Please start the car to improve electrical energy and extend the car battery life.
2. This model is limited to DC 12V power. If you want to use AC power, you need to use an adapter or
transformer.
3. Usually, a car tire could reach the standard tire pressure of 30PSI in 3 minutes. If the air pressure gauge needle rises quickly to 50-100 PSI, it is a warning that the air is blocked and has not entered the tire. At this point, quickly remove the pump connector and do it again. Otherwise, the motor and gauge will be easily damaged.
4. During use, you should note the tire pressure and not leave. And it is not recommended to over-inflate the tire (please refer to the car user's indication on this point).
5. If the car cigarette lighter is not clean and rusty, this could cause the fuse to blow. And the pump will not work. So you need to ensure the good condition of the cigarette lighter and the fuse. This pump is equipped with a fuse inside the pump plug, check the fuse inside the plug if the pump does not work. The fuse is 15A.
6. To ensure that the pump works correctly, it should not be used continuously for more than 10 minutes.
If you want it to work for a long time without interruption, run 10 minutes, stop 10 minutes for cooling. And then continue. Otherwise, it will be damaged.